Optimization Of Machining Parameters For Surface Finish Of EN 42 Alloy Steel For End Milling Operation Using Taguchi Method Tayade Pragati D.1,*, ME (Mechanical), Trikal S.P.2,*, Dr. Professor and Head 1S S G M College of Engineering, Shegaon 2Department of Mechanical Engineering, S S G M College of Engineering, Shegaon *Corresponding Author E-mail: pragatitayade777@gmail.com, sptrikal1971@yahoo.com
Abstract Present work includes the optimization of machining parameters to obtain surface finish of EN42 alloy steel using end milling operation. Milling operation performed on EN42 alloy steel using TiAlNi coated solid carbide end milling cutter of 12mm diameter. For this experimental work end milling machining parameters considered are spindle speed, feed and depth of cut. Taguchi method is implemented to find out the optimum cutting parameters for surface roughness. The process parameters are obtained for surface finish using Taguchi technique in minitab software. Top Keywords Milling Operation, Taguchi Method, Machining Parameters, Surface Roughness. Top |